How to Replace a Kitchen Faucet Step by Step
A new faucet can transform a kitchen, and the job is manageable with basic tools. This guide explains how to replace a kitchen faucet, what to buy and how to avoid the mistakes that cause leaks.
(847) 860-7173Call to confirm availabilityMeasure and Choose the Right Faucet
Most replacements go smoothly when the new faucet matches the sink. Count the holes in your sink or countertop, and measure the spacing between them. Single hole faucets can often cover a three hole deck with a cover plate, but a three hole faucet will not fit a single hole sink.
| Check | Why it matters |
|---|---|
| Number of sink holes | Determines faucet type and the need for a deck plate |
| Hole spacing | Four inch center sets must match |
| Sink thickness | Mounting hardware needs enough thread length |
| Clearance behind the faucet | Tall spouts may hit a window or backsplash |
| Sprayer or soap dispenser | Needs extra holes or a plan to cap them |
- Take a photo of the existing faucet and the space under the sink
- Check supply line size and connection type
- Look for a WaterSense label to save water
- Confirm the finish matches your fixtures
- Keep the receipt and warranty
What You Will Need
Most of the tools are common. A basin wrench is the one special item worth buying, since it reaches nuts in tight spaces behind the sink.
Reaches mounting nuts above your head under the sink.
Loosens supply line connections.
Catch water and keep the cabinet dry.
Seals the base of the faucet if required.
Shows the connections in a dark cabinet.
Fresh lines reduce the chance of leaks.
Replace the supply lines when you replace the faucet. Old lines can crack or leak a few months later.
Shut Off Water and Disconnect
- Close the hot and cold shutoff valves under the sink. If they will not turn, shut off the main valve.
- Open the faucet to release pressure and drain remaining water.
- Place a bucket under the connections.
- Disconnect the supply lines with an adjustable wrench.
- Unplug the sprayer hose if you have one.
- Loosen the mounting nuts with a basin wrench and lift the old faucet out.
- Clean the sink surface of old putty and mineral buildup.
If the nuts are corroded, a little penetrating oil can help. Work patiently so you do not crack the sink.
How to Replace a Kitchen Faucet With the New One
Follow the manufacturer instructions, since each design is slightly different. In general, the steps below apply.
- Place the gasket or putty on the base.
- Feed the supply tails and sprayer hose through the sink hole.
- Press the faucet down evenly and secure it from below.
- Tighten the mounting hardware until the faucet is steady.
- Connect the supply lines to the shutoff valves, hot on the left and cold on the right.
- Attach the sprayer hose and any weight.
- Remove the aerator and flush the lines before turning the faucet on fully.
Check for Leaks and Flush the Lines
Turn the shutoff valves back on slowly. Open the faucet and let water run for a minute to clear air and debris, then replace the aerator. Check each connection with a dry paper towel, and look again after an hour.
| Leak location | Likely cause | Fix |
|---|---|---|
| Under the spout base | Gasket not seated | Reseat and tighten the faucet |
| At supply connections | Loose nut or damaged washer | Tighten gently or replace the line |
| At the sprayer hose | Loose fitting | Tighten the quick connect |
| At the handle | Defective cartridge | Contact the manufacturer |
What Can Go Wrong
Corroded valves, stuck nuts and a sink that is too thick are the typical snags. If a shutoff valve leaks or will not close, it is best to replace it. Our faucet repair and installation team can handle valves, supply lines and installation if you prefer help.
- Stripped or seized mounting nuts
- Shutoff valves that do not close fully
- Insufficient clearance under the sink
- Mismatched hole configuration
- Cracked porcelain or granite while tightening
Aftercare and Cleanup
Wipe the faucet and sink dry, and clean any fingerprints. Keep the manual and warranty in a drawer. Check under the sink once a week for the first month, because slow leaks sometimes appear late.
- Dry the cabinet and look for moisture
- Label the shutoff valves for future repairs
- Clean the aerator every few months
- Run hot water to confirm flow and temperature
- Dispose of the old faucet or recycle the metal
When to Call a Plumber
If the sink area is tight, the valves are corroded or you do not want to risk water damage, a plumber can complete the job quickly. A professional also checks the shutoff valves, supply lines and drain connections at the same time.
Replace with quarter turn valves for reliability.
Replace traps and gaskets.
Consider a softener to protect new fixtures.
Avoid the risk of cracking by letting a pro handle it.
Picking a Faucet You Will Enjoy Using
Before the weekend project begins, think about how you use your sink. A pull down sprayer helps with big pots, a single handle is easy with wet hands and a touchless model keeps fingerprints down. If you cook often, choose solid construction and a replaceable cartridge. Anyone planning how to replace a kitchen faucet should also check the warranty and the availability of parts.
| Style | Best for | Watch out for |
|---|---|---|
| Pull down sprayer | Large sinks and cleanup | Needs room for the hose weight |
| Pull out spray | Shallow sinks | Check hose length |
| Single handle | Easy temperature control | Cartridge wear over time |
| Two handle | Traditional looks | More holes and parts |
| Touchless | Messy hands | Needs batteries or power |
- Check ratings for leaks and durability
- Choose a finish that resists fingerprints and water spots
- Make sure the spout height clears your tallest pot
- Look for ceramic disc or solid brass parts
- Keep the old faucet until the new one works
A mid priced faucet from a reputable brand with a lifetime parts warranty often beats a cheap model that needs replacement in a few years.
Protecting Your Cabinet and Countertop
Water damage is the biggest risk during any faucet swap. Empty the cabinet under the sink, lay down towels and keep a small bucket ready. Put a rag in the drain so small parts do not fall in. After the job, leave a dry paper towel under each connection for an hour to catch slow drips.
- Clear the cabinet before you start
- Use a headlamp for visibility
- Cover the drain opening
- Avoid overtightening plastic nuts
- Do not use a wrench on decorative finishes without a cloth
Be careful with mounting torque.
Watch for sharp edges.
May crack if you force the nuts.
Use the supplied hardware only.
Add Ons That Make the Job Easier
While the cabinet is empty, consider small upgrades. New quarter turn shutoff valves make future repairs easier, a sink strainer or soap dispenser can be added and an under sink organizer keeps cleaning supplies off the pipes. These extras cost little and improve how the kitchen works every day.
- Replace old multi turn shutoff valves
- Install braided stainless supply lines
- Add a leak alarm sensor under the sink
- Use a cabinet mat to catch drips
- Label the valves hot and cold
| Upgrade | Benefit |
|---|---|
| Quarter turn valves | Faster, more reliable shutoff |
| Leak sensor | Early warning of drips |
| Water filter tap | Better taste at the sink |
| Soap dispenser | Cleaner counter |
Kitchen Faucet Questions
How long does it take to replace a kitchen faucet?
Most people finish in one to two hours, and a plumber often takes less time.
Do I need to shut off the main water?
Usually the sink shutoff valves are enough. Use the main valve if they are stuck.
Can I replace a faucet without a basin wrench?
It is possible but difficult. A basin wrench makes the job much easier.
Should I replace the supply lines too?
Yes. New lines reduce leak risk and are inexpensive.
When should I call a plumber?
If valves are corroded, the sink is fragile or you see leaks you cannot stop.
Need Help With a Plumbing Problem in Northbrook?
Call us and describe what is happening. We will explain the options and when we can visit.
Call (847) 860-7173