Home › Blog › Sump Pump Installation
Installation guide

Sump Pump Installation: Types, Process and Backup Options

Sump pump installation protects a basement or crawl space from groundwater. This guide explains pump types, how installation works and why a backup matters.

Plumber repairing copper supply lines at a Northbrook, Illinois home(847) 860-7173Call to confirm availability
Why install

Why a Sump Pump Matters

A sump pump collects water in a pit and sends it away from the home. Without one, heavy rain and a high water table can flood a basement or crawl space. Installing a pump before problems start is far cheaper than repairing water damage.

Pump types

Choosing a Sump Pump

TypeNotes
SubmersibleSits in the pit, quiet, most common
PedestalMotor above the pit, easier to service but louder
Battery backupRuns when power fails
Water powered backupUses municipal water pressure, no battery
Process

How Installation Works

  • Choose a location at the lowest point of the basement or crawl space.
  • Cut and remove a section of floor if there is no pit yet.
  • Set the pit liner and install the pump with a check valve.
  • Run the discharge line away from the foundation.
  • Test the pump and float switch.

Installing in an existing pit is faster. A new pit takes more work. See our sump pump service for what is included.

Backup

Battery Backup Options

Storms that fill the pit often knock out power. A battery or water powered backup keeps the pump running. If you are installing a new pump, adding a backup at the same visit is the most efficient time.

Care

Maintaining a New Pump

  • Pour water into the pit twice a year to test the float.
  • Clean the pit and intake.
  • Check the discharge outlet for blockages.
  • Replace the backup battery as recommended.
Local help

Sump Pump Installation in Northbrook

We install and service sump pumps for Northbrook and nearby homes. Call (847) 860-7173 to schedule an assessment.

Sump Pump Installation Questions

How long does sump pump installation take?

Replacing a pump in an existing pit can take a couple of hours. A new pit takes longer.

Do I need a battery backup?

It is strongly recommended where storms cause power outages.

Where does the sump pump discharge water?

Away from the foundation through a discharge line, following local rules.

How often should a sump pump be tested?

Test it a couple of times a year, especially before the wet season.

Can I install a sump pump myself?

Replacing a pump is doable. New pit work and electrical connections are best done by a professional.

Need Help With a Plumbing Problem in Northbrook?

Call us and describe what is happening. We will explain the options and when we can visit.

Call (847) 860-7173
Call (847) 860-7173